Rightline-gear Cargo Saddle Bag User Manual download pdf

1-Clean the back of your vehicle, unscrew your license

plate and place it inside the Cargo Saddlebag’s interior

license plate sleeve (Fig 7).

2-Load the Cargo Saddle-

bag on the ground. The load

capacity of the carrier is

~100 lbs. Don’t exceed the

load rating of your vehicle’s

attachment points.

1-Loop the (2) long side straps around the vehicle’s lug-

gage rack; either the rear cross bar or the (2) side rails.

If using the rear cross bar (Fig10), it may be necessary to

move the cross bar towards the rear of the vehicle. If using

the side rails (Fig11) run each strap from the inside to the

outside of each rail.

Assemble The Bottom Pole Frame

Attach The Carrier - WITH A Roof Rack

Attach The Carrier - WITHOUT A Roof Rack

Cargo Saddlebag Set Up Guide

The correct attachment of this product is critical and

beyond the control of Rightline Gear. The safe use

and long life of this product depends entirely on

your good judgment and following these directions.

Fig 1

Fig 2

Fig 10

Fig 3

Fig 11

Fig 7

Continue with the section titled “Adjusting The Main Straps”.

1-Run (2) of the poles through the pole guides into the

sewn pole pockets (Fig 2).

3-Run the remaining (2)

poles through the Velcro

pole pockets, through the

pole guides and into the

junctions (Fig 4).

4-Make sure the individual segments of the pole frame

are rmly locked together by checking the pole buttons

(Fig 5).

5-Fold the Velcro closures over the ends of the (2) pole

pockets (Fig 6).

Sewn

Pole

Pockets

Velcro

Pole

Pockets

Pole Guides

Cross Pole/Junction

Assembly

Fig 4

Fig 5

Fig 6

2-Attach the cross pole/junction assembly onto the ends of

these poles (Fig 3).

Pack The Carrier

1-Open the vehicle’s rear hatch door just enough to run

the belt strap around the inside of the door. Make sure

the strap is not twisted. Hold the (2) strap ends tight and

close the door over the strap. Let the (2) strap ends hang

down (Fig 8).

2-Attach the Cargo Saddlebag to the vehicle per the

instructions in the following sections. Buckle the belt strap

around the carrier. Tighten the belt strap by adjusting the

tri-glide (Fig 9).

Attach The Belt Strap*

1-Add the Rightline Gear Saddlebag Car Clips (Fig 12)

(sold separately) to the long side straps (Fig 13). Please

see the Saddlebag Car Clips directions for more detail.

Fig 8

*The belt strap is optional if you attach the bottom straps

to your vehicle (see “Attach The Bottom Straps”).

Tri-glide

Buckle

Fig 9

1 2

Cargo Saddlebag Set Up Guide 1

Summary of Contents

Page 1 - Cargo Saddlebag Set Up Guide

1-Clean the back of your vehicle, unscrew your license plate and place it inside the Cargo Saddlebag’s interior license plate sleeve (Fig 7).2-Load th

Page 2

1-Run the (2) bottom straps through the guides on the bottom of the carrier and around the tow hitch, bum-per, or frame behind the bumper (Fig 18).•

Comments to this Manuals

No comments

Rightline-gear Cargo Saddle Bag User Manual

Browse online or download User Manual for Sports and recreation Rightline-gear Cargo Saddle Bag. Rightline Gear Cargo Saddle Bag User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sports and recreation Rightline-gear Cargo Saddle Bag